Hexagonal Morse Tapered | CMHDynamic CMH
The Dynamic CMH implant has a expanding tapered design that improves bone condensation in a gradual mode. It`s designed to offer high initial stability for all loading protocols with a minor inserction trauma. The macro design enables clinicians to ajust the implant position The double acid treated surface, Biotite, improves secondary stability and promotes long term success. The CMH morse tapered with an internal hex connection offers a tight seal and hight restoration stability. The implant coronal design and it`s plataform shifting are produced to optimize bone and soft tissue volume. Implant diameters are of 3.5mm, 4.3mm and 5.0mm.
Instructions of Use WHERE TO BUYFeatures
- A single Indexed Morse Tapered internal Interface for all implant diameters;
- Retention grooves in threads: increases bone implant contact area and primary stability;
- Biotite surface: Microporosity obtained through double acid etch, increasing secondary stability;
- Implant diameters:
- Dynamic CMH 3,5
- Dynamic CMH 4,3
- Dynamic CMH 5,0
Technical Information
Implants Ø 3,5 mm
| Length | “D” | “P1” | “P” | “b” | “d” | “L” | Code | Components |
|---|---|---|---|---|---|---|---|---|
| 8,5 mm | Ø 3,5 mm | Ø 3,5 mm | Ø 3 mm | 2,4 mm | Ø 2,6 mm | 8 mm | 02.23.16.321 | CMH NP |
| 10 mm | 9,5 mm | 02.23.16.322 | ||||||
| 11,5 mm | 11 mm | 02.23.16.323 | ||||||
| 13 mm | 12,5 mm | 02.23.16.324 | ||||||
| 15 mm | 14,5 mm | 02.23.16.325 |
Implants Ø 4,3 mm
| Length | “D” | “P1” | “P” | “b” | “d” | “L” | Code | Components |
|---|---|---|---|---|---|---|---|---|
| 8,5 mm | Ø 4,3 mm | Ø 3,9 mm | Ø 3 mm | 2,4 mm | Ø 3,2 mm | 8 mm | 02.23.16.351 | CMH NP |
| 10 mm | 9,5 mm | 02.23.16.352 | ||||||
| 11,5 mm | 11 mm | 02.23.16.353 | ||||||
| 13 mm | 12,5 mm | 02.23.16.354 | ||||||
| 15 mm | 14,5 mm | 02.23.16.355 |
Implants Ø 5,0 mm
| Length | “D” | “P1” | “P” | “b” | “d” | “L” | Code | Components |
|---|---|---|---|---|---|---|---|---|
| 8,5 mm | Ø 4,9 mm | Ø 3,9 mm | Ø 3 mm | 2,4 mm | Ø 3,6 mm | 8 mm | 02.23.16.361 | CMH NP |
| 10 mm | 9,5 mm | 02.23.16.362 | ||||||
| 11,5 mm | 11 mm | 02.23.16.363 | ||||||
| 13 mm | 12,5 mm | 02.23.16.364 | ||||||
| 15 mm | 14,5 mm | 02.23.16.365 |
Biotite Surface
With large-scale investments in research and development, Dérig achieved high quality in implant surface treatment, with the purpose of providing more safety and clinical stability.
Increased hydrophilia enables the concept of secondary osseointegration and higher postoperative healing speed.
Get to Know this technologyDrilling Protocol
| Start Drill | Ø 2,0 | Ø 2,8 | Ø 3,0 | Ø 3,15 | Ø 3,5 | Ø 4,3 | Countersink UN | |
|---|---|---|---|---|---|---|---|---|
| Ø 3,5 mm | ||||||||
| Ø 4,3 mm | ||||||||
| Ø 5,0 mm |
Required
Optional based on bone density
Implant Driver
- Internal torque with grip system for capture and insertion;
- Increased mechanical resistance to insertion;
- Enhanced safety in the implant transport;
- Increased integrity maintenance of the morse tapered connection;
- A single insertion drive for torque wrench and counter-angle
| Description | Code |
|---|---|
| CMH NP Short Implant Driver | 02.01.11.233 |
| CMH NP Long Implant Driver | 02.01.11.234 |
